National Item Identification Number
01-247-9267
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Description
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
53711
54490
DEPT OF THE ARMY
U S ARMY ELECTRONICS COMMAND
10221 BURBECK RD
FORT BELVOIR
VA
22060
703-704-1332
50079
TEXTRON SYSTEMS CORPORATION
DBA TEXTRON MAR & LAND SYSTEMS DIV
77 HENRRIETTA CREEK
ROANOKE
TX
76262
817-280-7632
53711
Reference Numbers (Part Numbers)
119-5750388-047
5003231
5750388-047
5750388-047
Required Categories
MATERIAL
MATERIAL DOCUMENT AND CLASSIFICATION
SURFACE TREATMENT
SURFACE TREAT
Required Description
ALUMINUM ALLOY 3003 OVERALL
QQ-A-250/2 FED SPEC SINGLE MATERIAL RESPONSE OVERAL