National Item Identification Number
01-117-1510
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Referenced on: http://constructionforklifts.tpub.com//TM-10-3930-668-24P/TM-10-3930-668-24P0323.htm
Referenced on: http://constructionforklifts.tpub.com//TM-10-3930-668-24P/TM-10-3930-668-24P0348.htm
Referenced on: http://constructionforklifts.tpub.com//TM-10-3930-668-24P/TM-10-3930-668-24P0387.htm
Referenced on: http://constructionforklifts.tpub.com//TM-10-3930-668-24P/TM-10-3930-668-24P0390.htm
Referenced on: http://waterstorage.tpub.com//TM-5-3825-225-14P/css/TM-5-3825-225-14P_339.htm
Referenced on: http://waterstorage.tpub.com//TM-5-3825-225-14P/css/TM-5-3825-225-14P_359.htm
Referenced on: http://waterstorage.tpub.com//TM-5-3825-225-14P/css/TM-5-3825-225-14P_392.htmDescription
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
0373B
BIURRARENA S.COOP.
DONOSTIA IBILBIDEA 28 POL. BIDEBITAR
887
ASTIGARRAGA
E-20115
SPAIN
943332568
13446
PERKINS ENGINES INC
26200 TOWN CENTER DR STE 280
610
MOSSVILLE
IL
61552
309-578-7364
NSN (National Stock Number) 5310-01-117-1510, 5310011171510 NIIN (National Identification Number) 01-117-1510, 011171510
Part Numbers (Reference Numbers)
0920112
0920112
Required Categories
MATERIAL
HOLE DIAMETER
PERIPHERAL SHAPE STYLE
OVERALL DIAMETER
CENTER HOLE S
Required Description
ALUMINUM OVERALL
0.515 INCHES NOMINAL
1 ROUND
0.718 INCHES NOMINAL
1 ROUND;