National Item Identification Number
01-082-6170
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Referenced on: http://constructionforklifts.tpub.com//TM-10-3930-643-24P/TM-10-3930-643-24P0526.htm
Referenced on: http://constructionforklifts.tpub.com//TM-10-3930-643-24P/TM-10-3930-643-24P0598.htm
Referenced on: http://constructionforklifts.tpub.com//TM-10-3930-643-24P/TM-10-3930-643-24P0732.htmDescription
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
04627
NACCO MATERIALS HANDLING GROUP INC
DBA HYSTER COMPANY
1010 E FAIRCHILD ST
DANVILLE
IL
61832
217-443-7416
30076
NACCO MATERIALS HANDLING GROUP INC.
DBA HYSTER COMPANY
1400 SULLIVAN DRIVE
GREENVILLE
NC
27834
248-924-2640
97907
TEREX CORP
5400 S 49TH WEST AVE
3107
TULSA
OK
74101
918-446-5581
NSN (National Stock Number) 5310-01-082-6170, 5310010826170 NIIN (National Identification Number) 01-082-6170, 010826170
Part Numbers (Reference Numbers)
174071
174071
9056030
Required Categories
MATERIAL
MATERIAL DOCUMENT AND CLASSIFICATION
HOLE DIAMETER
PERIPHERAL SHAPE
Required Description
STEEL OVERALL
ASTM A3 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
1.252 INCHES M