National Item Identification Number
00-145-0224
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Referenced on: http://constructiontractors.tpub.com//TM-10-3930-409-24P/css/TM-10-3930-409-24P_162.htm
Referenced on: http://constructiontractors.tpub.com//TM-10-3930-409-24P/css/TM-10-3930-409-24P_181.htm
Referenced on: http://constructiontractors.tpub.com//TM-10-3930-409-24P/css/TM-10-3930-409-24P_195.htm
Referenced on: http://constructiontractors.tpub.com//TM-10-3930-603-24P/css/TM-10-3930-603-24P_166.htm
Referenced on: http://constructiontractors.tpub.com//TM-10-3930-603-24P/css/TM-10-3930-603-24P_186.htm
Referenced on: http://constructiontractors.tpub.com//TM-10-3930-603-24P/css/TM-10-3930-603-24P_199.htmDescription
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
12204
24617
57526
12204
86403
CHRYSLER CORP
SERVICE AND PARTS OPNS
26311 LAWRENCE AVE
CENTER LINE
MI
48015
586-497-0999
19207
77237
NSN (National Stock Number) 5310-00-145-0224, 5310001450224 NIIN (National Identification Number) 00-145-0224, 001450224
Part Numbers (Reference Numbers)
20-31
20-31
603926
644945
644945
645613
645613
7378053
852703
852703
Required Categories
MATERIAL
MATERIAL DOCUMENT AND CLASSIFICATION
HOLE DIAMETER
PERIPHERAL SHAPE
Required Description
PLASTIC POLYTETRAFLUOROETHYLENE OVERALL
AMS 3564 ASSN STD SINGLE MATERIAL RESPO