National Item Identification Number
00-954-7183
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Description
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
00141
00328
DESIGNATRONICS INC
DBA STERLING INSTRUMENT DIVISION
2101 JERICHO TPKE
NEW HYDE PARK
NY
11040
516-328-3300
56232
28009
SYPRIS DATA SYSTEMS INC
DIV CENTENNIAL
7307 S REVERE PKWY 200
ENGLEWOOD
CO
80112
909-962-9494
Reference Numbers (Part Numbers)
B8-6
DB8D6
DB86
G70-6
1650407-36
16758128-096
836
Required Categories
MATERIAL
SURFACE TREATMENT
HOLE DIAMETER
PERIPHERAL SHAPE STYLE
OVERALL DIAM
Required Description
STEEL COMP 303 OVERALL
PASSIVATE OVERALL
0.250 INCHES MINIMUM AND
0.260 INCHE