National Item Identification Number
00-682-4425
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Referenced on: http://constructiontractors.tpub.com//TM-5-2410-233-23P/TM-5-2410-233-23P0778.htm
Referenced on: http://constructiontractors.tpub.com//TM-5-2410-233-23P/TM-5-2410-233-23P0827.htm
Referenced on: http://constructiontractors.tpub.com//TM-5-2410-236-24P/css/TM-5-2410-236-24P_406.htm
Referenced on: http://constructiontractors.tpub.com//TM-5-2410-236-24P/css/TM-5-2410-236-24P_448.htm
Referenced on: http://constructiontractors.tpub.com//TM-5-2410-236-24P/css/TM-5-2410-236-24P_537.htm
Referenced on: http://waterstorage.tpub.com//TM-5-3825-226-24P/css/TM-5-3825-226-24P_466.htm
Referenced on: http://waterstorage.tpub.com//TM-5-3825-226-24P/css/TM-5-3825-226-24P_509.htm
Referenced on: http://waterstorage.tpub.com//TM-5-3825-226-24P/css/TM-5-3825-226-24P_584.htmDescription
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
82152
85480
BRADY W H CO
CORP H Q INDUSTRIAL PRODUCTS DIV
6555 W GOOD HOPE RD
2131
MILWAUKEE
WI
53223
888-272-3946
85480
BRADY W H CO
CORP H Q INDUSTRIAL PRODUCTS DIV
6555 W GOOD HOPE RD
2131
MILWAUKEE
WI
53223
888-272-3946
D9182
NSN (National Stock Number) 5310-00-682-4425, 5310006824425 NIIN (National Identification Number) 00-682-4425, 006824425
Part Numbers (Reference Numbers)
APS20-118-15
LWNY-015NA
NW8-3756
1P-7326
Required Categories
MATERIAL
HOLE DIAMETER
PERIPHERAL SHAPE STYLE
OVERALL DIAMETER
CENTER HOLE S
Required Description
PLASTIC POLYAMIDE OVERALL
0.170 INCHES NOMINAL
1 ROUND
0.375 INCHES NOMINAL;