National Item Identification Number
00-655-7219
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Referenced on: http://aviationandaccessories.tpub.com//TM-55-4920-428-30P/css/TM-55-4920-428-30P_51.htm
Referenced on: http://aviationandaccessories.tpub.com//TM-55-4920-428-30P/css/TM-55-4920-428-30P_58.htm
Referenced on: http://electronictestfacilities.tpub.com//TM-1-6625-3081-30P/css/TM-1-6625-3081-30P_570.htm
Referenced on: http://electronictestfacilities.tpub.com//TM-1-6625-3081-30P/css/TM-1-6625-3081-30P_644.htm
Referenced on: http://www.tpub.com/content/misc_manuals_2/TM-9-1450-500-24P/TM-9-1450-500-24P0437.htm
Referenced on: http://www.tpub.com/content/misc_manuals_2/TM-9-1450-500-24P/TM-9-1450-500-24P0485.htm
Referenced on: http://www.tpub.com/content/misc_manuals_2/TM-9-1450-500-24P/TM-9-1450-500-24P0561.htm
Referenced on: http://www.tpub.com/content/misc_manuals_2/TM-9-2350-259-24P/TM-9-2350-259-24P0427.htm
Referenced on: http://www.tpub.com/content/misc_manuals_2/TM-9-2350-259-24P/TM-9-2350-259-24P0535.htm
Referenced on: http://www.tpub.com/content/misc_manuals_2/TM-9-2350-259-24P/TM-9-2350-259-24P0536.htmDescription
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
43999
5M658
JUNKIN SAFETY APPLIANCE COMPANY INC.
3121 MILLERS LN
LOUISVILLE
KY
40216
502-775-8303
N0982
TELENOR COMMA A/S
OLAF HELSETS VEI 5
6448 ETTERSTAD
OSLO
0694
NORWAY
22627500
13499
N0918
TINGSTAD A/S
STAALFJAERA 17
83 KALBAKKEN
OSLO
0975
NORWAY
22169400
N0918
TINGSTAD A/S
STAALFJAERA 17
83 KALBAKKEN
OSLO
0975
NORWAY
22169400
19203
NSN (National Stock Number) 5310-00-655-7219, 5310006557219 NIIN (National Identification Number) 00-655-7219, 006557219
Part Numbers (Reference Numbers)
LD153-0034-0004
NAS620-416
2109-010
218174
2528823
310-0740-610
6-4MMDIN12
Required Categories
MATERIAL
MATERIAL DOCUMENT AND CLASSIFICATION
SURFACE TREATMENT
HOLE DIAMETER
Required Description
STEEL COMP 1008 OR
STEEL COMP 1009 OR
STEEL COMP 1015 OR
STEEL COMP 1018 OR;