National Item Identification Number
00-616-6822
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Referenced on: http://www.tpub.com/content/aviationgenmaint/TM-1-1270-476-23P/css/TM-1-1270-476-23P_301.htm
Referenced on: http://www.tpub.com/content/aviationgenmaint/TM-1-1270-476-23P/css/TM-1-1270-476-23P_338.htm
Referenced on: http://www.tpub.com/content/aviationgenmaint/TM-55-1680-320-23P/css/TM-55-1680-320-23P_466.htm
Referenced on: http://www.tpub.com/content/aviationgenmaint/TM-55-1680-320-23P/css/TM-55-1680-320-23P_482.htm
Referenced on: http://www.tpub.com/content/chhelicopters/TM-11-6610-202-34P/TM-11-6610-202-34P0009.htm
Referenced on: http://www.tpub.com/content/chhelicopters/TM-11-6610-202-34P/TM-11-6610-202-34P0033.htm
Referenced on: http://www.tpub.com/content/chhelicopters/TM-11-6610-202-34P/TM-11-6610-202-34P0043.htm
Referenced on: http://www.tpub.com/content/elecgentestequip/TM-11-6625-2884-30P/TM-11-6625-2884-30P0051.htm
Referenced on: http://www.tpub.com/content/elecgentestequip/TM-11-6625-2884-30P/TM-11-6625-2884-30P0055.htm
Referenced on: http://gasturbinegenerators.tpub.com//TM-5-6115-590-20P/css/TM-5-6115-590-20P_102.htm
Referenced on: http://gasturbinegenerators.tpub.com//TM-5-6115-590-20P/css/TM-5-6115-590-20P_122.htm
Referenced on: http://gasturbinegenerators.tpub.com//TM-5-6115-590-20P/css/TM-5-6115-590-20P_356.htm
Referenced on: http://gasturbinegenerators.tpub.com//TM-5-6115-590-20P/css/TM-5-6115-590-20P_65.htm
Referenced on: http://gasturbinegenerators.tpub.com//TM-5-6115-590-20P/css/TM-5-6115-590-20P_97.htm
Referenced on: http://gasturbinegenerators.tpub.com//TM-5-6115-590-20P/css/TM-5-6115-590-20P_98.htm
Referenced on: http://gasturbinegenerators.tpub.com//TM-5-6115-590-20P/css/TM-5-6115-590-20P_98.htm
Referenced on: http://gasturbinegenerators.tpub.com//TM-5-6115-612-24P/css/TM-5-6115-612-24P_291.htm
Referenced on: http://gasturbinegenerators.tpub.com//TM-5-6115-612-24P/css/TM-5-6115-612-24P_292.htm
Referenced on: http://gasturbinegenerators.tpub.com//TM-5-6115-612-24P/css/TM-5-6115-612-24P_294.htm
Referenced on: http://gasturbinegenerators.tpub.com//TM-5-6115-612-24P/css/TM-5-6115-612-24P_296.htm
Referenced on: http://gasturbinegenerators.tpub.com//TM-5-6115-612-24P/css/TM-5-6115-612-24P_297.htm
Referenced on: http://gasturbinegenerators.tpub.com//TM-5-6115-612-24P/css/TM-5-6115-612-24P_299.htm
Referenced on: http://gasturbinegenerators.tpub.com//TM-5-6115-612-24P/css/TM-5-6115-612-24P_302.htm
Referenced on: http://gasturbinegenerators.tpub.com//TM-5-6115-612-24P/css/TM-5-6115-612-24P_390.htm
Referenced on: http://www.tpub.com/content/misc_manuals_3/TM-9-4931-456-14-1/TM-9-4931-456-14-10125.htm
Referenced on: http://www.tpub.com/content/misc_manuals_3/TM-9-4931-456-14-1/TM-9-4931-456-14-10129.htm
Referenced on: http://multiplexers.tpub.com//TM-11-7025-202-34P/TM-11-7025-202-34P0120.htm
Referenced on: http://multiplexers.tpub.com//TM-11-7025-202-34P/TM-11-7025-202-34P0161.htm
Referenced on: http://recoveryvehicles.tpub.com//TM-1-1680-320-13-P/0834270333.htm
Referenced on: http://recoveryvehicles.tpub.com//TM-1-1680-320-13-P/0834270334.htm
Referenced on: http://recoveryvehicles.tpub.com//TM-1-1680-320-13-P/0834270381.htm
Referenced on: http://welding.tpub.com//TM-5-6115-590-34P/TM-5-6115-590-34P0052.htm
Referenced on: http://welding.tpub.com//TM-5-6115-590-34P/TM-5-6115-590-34P0070.htm
Referenced on: http://welding.tpub.com//TM-5-6115-590-34P/TM-5-6115-590-34P0103.htm
Referenced on: http://welding.tpub.com//TM-5-6115-590-34P/TM-5-6115-590-34P0104.htm
Referenced on: http://welding.tpub.com//TM-5-6115-590-34P/TM-5-6115-590-34P0108.htm
Referenced on: http://welding.tpub.com//TM-5-6115-590-34P/TM-5-6115-590-34P0128.htm
Referenced on: http://welding.tpub.com//TM-5-6115-590-34P/TM-5-6115-590-34P0562.htmDescription
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
U8539
EMMERSON PROCESS MANAGEMENT
HEATH PLACE
BOGNOR REGIS
PO22 9SL
UNITED KINGDOM
01243 842703
59875
ARGO-TECH CORPORATION
AIRCRAFT ACCESSORIES DIV
23555 EUCLID AVE
CLEVELAND
OH
44117
216-692-5921
13499
59875
ARGO-TECH CORPORATION
AIRCRAFT ACCESSORIES DIV
23555 EUCLID AVE
CLEVELAND
OH
44117
216-692-5921
NSN (National Stock Number) 5310-00-616-6822, 5310006166822 NIIN (National Identification Number) 00-616-6822, 006166822
Part Numbers (Reference Numbers)
C10346-0009-0001
NAS620-6L
NAS620-6L
NAS620-6L
310-0740-330
91879-9
Required Categories
MATERIAL
MATERIAL DOCUMENT AND CLASSIFICATION
SURFACE TREATMENT
SURFACE TREAT
Required Description
STEEL OVERALL
QQ-S-698 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
CADMIUM OVERA