National Item Identification Number
00-559-5139
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Description
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
06481
33322
GETRONICS GOVERNMENT SOLUTIONS LLC
SPARES/SUPPLIES SALES
2525 NETWORK PL
HERNDON
VA
20171
703-563-7500
53178
BULL HN INFORMATION SYSTEMS INC
38 LIFE ST
BRIGHTON
MA
02135
617-783-6859
Reference Numbers (Part Numbers)
670545-3
70902057-001
70902057-001
Required Categories
MATERIAL
COLOR
HARDNESS RATING
HOLE DIAMETER
PERIPHERAL SHAPE STYLE
OVERALL
Required Description
RUBBER SYNTHETIC OVERALL
BLACK OVERALL
50.0 DUROMETER MINIMUM AND
70.0 DUROME