National Item Identification Number
00-517-3496
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Description
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
H2229
MAATSCHAPPIJ DE MAAS BV
HEIJPLAATSTRAAT 21
54560
ROTTERDAM
3089 JB
NETHERLANDS
010-4872111
3D6E9
AXLE TECH INTERNATIONAL INC
3001 WEST BIG BEAVER 400
TROY
MI
48084
248-244-9724
78500
MERITOR HEAVY VEHICLE SYSTEMS LLC
DBA MERITOR WABCO VEHICLE CONTROL
2135 W MAPLE RD
TROY
MI
48084
859-525-3764
62508
UTILITY TRAILER MFG CO
17300 E CHESTNUT
LA PUENTE
CA
91747
626-965-1541
78500
MERITOR HEAVY VEHICLE SYSTEMS LLC
DBA MERITOR WABCO VEHICLE CONTROL
2135 W MAPLE RD
TROY
MI
48084
859-525-3764
19207
Reference Numbers (Part Numbers)
XX002-1642
1229H762
1229H762
1229N326
1229N326
1229N326
5173496
Required Categories
MATERIAL
MATERIAL DOCUMENT AND CLASSIFICATION
SURFACE TREATMENT
HOLE DIAMETER
Required Description
STEEL OVERALL
QQ-S-636-CANCELED FED SPEC SINGLE MATERIAL RESPONSE OVERALL
PHOS