National Item Identification Number
00-447-9773
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Description
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
24617
72915
GENERAL MOTORS CORP
ELECTRO-MOTIVE DIV
9301 W 55TH ST
430
LA GRANGE
IL
60525
708-387-6000
24617
24617
72915
GENERAL MOTORS CORP
ELECTRO-MOTIVE DIV
9301 W 55TH ST
430
LA GRANGE
IL
60525
708-387-6000
24617
72915
GENERAL MOTORS CORP
ELECTRO-MOTIVE DIV
9301 W 55TH ST
430
LA GRANGE
IL
60525
708-387-6000
Reference Numbers (Part Numbers)
8071849
8071849
807511PC8071849
8075114PC8071849
8075114PC8071849
8075117PC
Required Categories
MATERIAL
MATERIAL DOCUMENT AND CLASSIFICATION
PERIPHERAL SHAPE STYLE
OVERALL
Required Description
WOOL COMP 16R1 OVERALL
C-F-206,TYPE 1,CL 16R1 FED SPEC SINGLE MATERIAL RESPONSE