National Item Identification Number
00-413-6522
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Referenced on: http://constructionbulldozers.tpub.com//TM-5-2410-234-34P/css/TM-5-2410-234-34P_725.htm
Referenced on: http://constructionbulldozers.tpub.com//TM-5-2410-234-34P/css/TM-5-2410-234-34P_831.htm
Referenced on: http://constructiontractors.tpub.com//TM-5-2410-233-23P/TM-5-2410-233-23P0769.htm
Referenced on: http://constructiontractors.tpub.com//TM-5-2410-233-23P/TM-5-2410-233-23P0867.htm
Referenced on: http://constructiontractors.tpub.com//TM-5-2410-236-24P/css/TM-5-2410-236-24P_401.htm
Referenced on: http://constructiontractors.tpub.com//TM-5-2410-236-24P/css/TM-5-2410-236-24P_472.htm
Referenced on: http://constructiontractors.tpub.com//TM-5-2410-236-24P/css/TM-5-2410-236-24P_569.htm
Referenced on: http://constructiontractors.tpub.com//TM-5-2410-236-24P/css/TM-5-2410-236-24P_581.htm
Referenced on: http://containerhandler.tpub.com//TM-10-3930-641-24P/TM-10-3930-641-24P0696.htm
Referenced on: http://containerhandler.tpub.com//TM-10-3930-641-24P/TM-10-3930-641-24P0773.htmDescription
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
0141B
NAVANTIA S.A.
VELAZQUEZ 132
90
MADRID
E-28006
SPAIN
913358400
409BB
NAVANTIA - PROPULSION Y ENERGIA MOTO
S - CARTAGENA
CTRA. DE AL ALGAMECA S/N
CARTAGENA
E-30205
SPAIN
968128200
11083
NSN (National Stock Number) 5310-00-413-6522, 5310004136522 NIIN (National Identification Number) 00-413-6522, 004136522
Part Numbers (Reference Numbers)
2S-7593
2S-7593
2S7593
Required Categories
MATERIAL
MATERIAL DOCUMENT AND CLASSIFICATION
HARDNESS RATING
HOLE DIAMETER;
Required Description
STEEL OVERALL
1E492,FSCM 11083 MFR REF SINGLE MATERIAL RESPONSE OVERALL
36.0 R