National Item Identification Number
00-399-5299
National Stock Number
Item Name
NUT,SLEEVE
Federal Supply Class
5310
Description
An internally threaded item with a cylindrical and/or square, hexagonal, octagonal, or dodecagonal outer periphery (parallel to the threaded axis) a portion(s) of which may or may not be enlarged, forming a flange(s) and/or shoulder(s). Items not having an enlarged outer portion may be threaded, a part of the full length, or tapped from both ends. Items having an enlarged outer portion (flange(s) or shoulder(s)) may be threaded the full length, threaded a part of the full length, or tapped from both ends. Items tapped from both ends shall have either right-hand threads on both ends or left-hand threads on both ends. For items conforming to any of the above and having a length overall exceeding two times the largest outside diameter or width across flats, use POST, ELECTRICAL-MECHANICAL EQUIPMENT. For items with an outside contour that is the same the full length, having a continuous thread through its entire length, and the length does not exceed two times the diameter or width across the flats use NUT (1), PLAIN (as modified). Excludes NUT (1), PLAIN, CAP. See also TURNBUCKLE BODY.
Commercial and Government Entity Code (Supplier Data)
16603
CONTROL FLOW INC
DBA WESTECH HEAVY MACHINERY DIV DIV
1220 E 29TH ST
SIGNAL HILL
CA
90755
562-528-3303
3X894
16603
CONTROL FLOW INC
DBA WESTECH HEAVY MACHINERY DIV DIV
1220 E 29TH ST
SIGNAL HILL
CA
90755
562-528-3303
3X894
16603
CONTROL FLOW INC
DBA WESTECH HEAVY MACHINERY DIV DIV
1220 E 29TH ST
SIGNAL HILL
CA
90755
562-528-3303
3X894
Reference Numbers (Part Numbers)
B4229-3
B4229-3
N277ALT6PC108
N277ALT6PC108
N277P108
N277P108
504985
Required Categories
THREAD DIRECTION
MATERIAL
MATERIAL DOCUMENT AND CLASSIFICATION
NUT STYLE
FLA
Required Description
RIGHT-HAND
COPPER ALLOY OVERALL
QQ-C-390,COMP 903 FED SPEC SINGLE MATERIAL RES