National Item Identification Number
00-362-6765
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Description
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
1LW55
REMY INTERNATIONAL INC
2902 ENTERPRISE DR
ANDERSON
IN
46013
765-778-6889
24617
72582
MTU DETROIT DIESEL INC
DBA FOREIGN PARENT IS MTU
13400 W OUTER DR
DETROIT
MI
48239
313-592-5826
1LW55
REMY INTERNATIONAL INC
2902 ENTERPRISE DR
ANDERSON
IN
46013
765-778-6889
24617
83299
NACCO MATERIALS HANDLING GROUP INC.
DBA YALE MATERIALS HANDLING
1400 SULLIVAN DRIVE CALLER NO. 12011
GREENVILLE
NC
27834
908-788-3585
83299
NACCO MATERIALS HANDLING GROUP INC.
DBA YALE MATERIALS HANDLING
1400 SULLIVAN DRIVE CALLER NO. 12011
GREENVILLE
NC
27834
908-788-3585
Reference Numbers (Part Numbers)
1858752
1858752
1858752
1858752
1914583
1914583
1914583
34389
583K959
5
Required Categories
MATERIAL
MATERIAL DOCUMENT AND CLASSIFICATION
SURFACE TREATMENT
HOLE DIAMETER
Required Description
STEEL COMP 1010 OVERALL
QQ-S-633 CANC FED SPEC SINGLE MATERIAL RESPONSE OVERALL