National Item Identification Number
00-297-6078
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Referenced on: http://www.tpub.com/content/misc_manuals_2/TM-9-2350-238-20P/TM-9-2350-238-20P0021.htm
Referenced on: http://www.tpub.com/content/misc_manuals_2/TM-9-2350-238-20P/TM-9-2350-238-20P0344.htmDescription
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
89926
89926
89926
97907
TEREX CORP
5400 S 49TH WEST AVE
3107
TULSA
OK
74101
918-446-5581
19207
23862
MILITARY VEHICLES OPN
GENERAL MOTORS TRUCK AND BUS GROUP
660 S BOULEVARD E
PONTIAC
MI
48341
248-456-5000
24617
70040
GENERAL MOTORS CORP
AC ROCHESTER DIV
4800 S SAGINAW ST
1360
FLINT
MI
48501
810-835-8322
NSN (National Stock Number) 5310-00-297-6078, 5310002976078 NIIN (National Identification Number) 00-297-6078, 002976078
Part Numbers (Reference Numbers)
0040330
0040330-3
040330
43045
5329469
536A6
853269
853269
853269
Required Categories
MATERIAL
HOLE DIAMETER
PERIPHERAL SHAPE STYLE
OVERALL DIAMETER
CENTER HOLE S
Required Description
CELLULOSE OVERALL
0.755 INCHES MINIMUM AND
0.760 INCHES MAXIMUM
1 ROUND
1.06