National Item Identification Number
00-285-1542
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Description
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
24446
73734
FEDERAL SCREW PRODUCTS INC
9742 W FOSTER ST
ROSEMONT
IL
60018
773-992-2600
D9182
Reference Numbers (Part Numbers)
D1724B
D1724E
N402P7C6
1404
82560-63
Required Categories
MATERIAL
SURFACE TREATMENT
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
HOLE
Required Description
STEEL OVERALL
CADMIUM OVERALL
QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RES