National Item Identification Number
00-281-2501
National Stock Number
Item Name
WASHER,LOCK
Federal Supply Class
5310
Referenced on: http://teletypewriter.tpub.com//TM-11-5815-206-20P/TM-11-5815-206-20P0018.htm
Referenced on: http://teletypewriter.tpub.com//TM-11-5815-206-20P/TM-11-5815-206-20P0028.htm
Referenced on: http://teletypewriter.tpub.com//TM-11-5815-206-20P/TM-11-5815-206-20P0030.htm
Referenced on: http://teletypewriter.tpub.com//TM-11-5815-206-20P/TM-11-5815-206-20P0040.htm
Referenced on: http://teletypewriter.tpub.com//TM-11-5815-206-20P/TM-11-5815-206-20P0050.htm
Referenced on: http://teletypewriter.tpub.com//TM-11-5815-206-20P/TM-11-5815-206-20P0052.htm
Referenced on: http://teletypewriter.tpub.com//TM-11-5815-206-20P/TM-11-5815-206-20P0060.htm
Referenced on: http://teletypewriter.tpub.com//TM-11-5815-206-20P/TM-11-5815-206-20P0068.htm
Referenced on: http://teletypewriter.tpub.com//TM-11-5815-206-20P/TM-11-5815-206-20P0095.htm
Referenced on: http://teletypewriter.tpub.com//TM-11-5815-306-34P/TM-11-5815-306-34P0011.htm
Referenced on: http://teletypewriter.tpub.com//TM-11-5815-306-34P/TM-11-5815-306-34P0024.htm
Referenced on: http://teletypewriter.tpub.com//TM-11-5815-306-34P/TM-11-5815-306-34P0077.htm
Referenced on: http://teletypewriter.tpub.com//TM-11-5815-306-34P/TM-11-5815-306-34P0154.htm
Referenced on: http://teletypewriter.tpub.com//TM-11-5815-306-34P/TM-11-5815-306-34P0186.htm
Referenced on: http://teletypewriter.tpub.com//TM-11-5815-306-34P/TM-11-5815-306-34P0188.htmDescription
A washer which is usually round with a centrally located hole. Its edges and two bearing surfaces are so designed that applied pressure brings into play the spring tension and/or frictional locking principle which materially resists any tendency toward turning. It may be made of one or two pieces
Commercial and Government Entity Code (Supplier Data)
NSN (National Stock Number) 5310-00-281-2501, 5310002812501 NIIN (National Identification Number) 00-281-2501, 002812501
Part Numbers (Reference Numbers)
Required Categories
MATERIAL
STYLE DESIGNATOR
HOLE DIAMETER
OUTSIDE DIAMETER
MATERIAL THICKNESS
Required Description
COPPER ALLOY OVERALL
106 FLAT EXTERNAL AND INTERNAL TEETH
0.195 INCHES MINIMUM