National Item Identification Number
00-275-6794
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Description
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
24975
PRESTOLITE ELECTRIC INCORPORATED
LEECE-NEVILLE DIV
2311 GREEN RD STE B
ANN ARBOR
MI
48105
585-492-1700
33323
KENWORTH TRUCK CO
A DIV OF PACCAR INC
10630 NE 38TH PLACE
1000
KIRKLAND
WA
98033
425-828-5000
62265
VOLVO TRUCKS NORTH AMERICA INC
7825 NATIONAL SERVICE RD
GREENSBORO
NC
27402
757-523-0973
95201
NAPCO INTERNATIONAL LLC
11055 EXCELSIOR BLVD
HOPKINS
MN
55343
952-931-2490
Reference Numbers (Part Numbers)
BB27998
MG61
MG61
MG61
MG61
16UU02959
5A7100
Required Categories
MATERIAL
MATERIAL DOCUMENT AND CLASSIFICATION
HOLE DIAMETER
PERIPHERAL SHAPE
Required Description
STEEL COMP 1008 OVERALL
SAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
0.890 IN