National Item Identification Number
00-275-1347
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Referenced on: http://powersupplies.tpub.com//TM-11-5820-554-24P-4/TM-11-5820-554-24P-40018.htm
Referenced on: http://powersupplies.tpub.com//TM-11-5820-554-24P-4/TM-11-5820-554-24P-40041.htm
Referenced on: http://radiosets.tpub.com//TM-11-5820-518-34P/TM-11-5820-518-34P0161.htm
Referenced on: http://radiosets.tpub.com//TM-11-5820-518-34P/TM-11-5820-518-34P0173.htm
Referenced on: http://radiosets.tpub.com//TM-11-5820-554-20P-2/TM-11-5820-554-20P-20013.htm
Referenced on: http://radiosets.tpub.com//TM-11-5820-554-20P-2/TM-11-5820-554-20P-20017.htm
Referenced on: http://radiosets.tpub.com//TM-11-5820-554-34P-2/TM-11-5820-554-34P-20013.htm
Referenced on: http://radiosets.tpub.com//TM-11-5820-554-34P-2/TM-11-5820-554-34P-20017.htm
Referenced on: http://radiosets.tpub.com//TM-11-5821-248-34P/TM-11-5821-248-34P0017.htm
Referenced on: http://radiosets.tpub.com//TM-11-5821-248-34P/TM-11-5821-248-34P0198.htmDescription
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
82199
07187
56232
06481
79807
WROUGHT WASHER MFG INC
2100 S BAY ST
MILWAUKEE
WI
53207
414-744-0771
13499
79807
WROUGHT WASHER MFG INC
2100 S BAY ST
MILWAUKEE
WI
53207
414-744-0771
NSN (National Stock Number) 5310-00-275-1347, 5310002751347 NIIN (National Identification Number) 00-275-1347, 002751347
Part Numbers (Reference Numbers)
C0188-7
0188-7
0188-7
118369
310-0046-00
310-0046-000
310-0046-000
Required Categories
MATERIAL
MATERIAL DOCUMENT AND CLASSIFICATION
HOLE DIAMETER
PERIPHERAL SHAPE
Required Description
STEEL COMP 302 OVERALL
QQ-S-00766,CLASS 302 FED SPEC SINGLE MATERIAL RESPONSE O