National Item Identification Number
00-264-1389
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Referenced on: http://waterdecontamination.tpub.com//TM-10-4610-215-24P/css/TM-10-4610-215-24P_168.htm
Referenced on: http://waterdecontamination.tpub.com//TM-10-4610-215-24P/css/TM-10-4610-215-24P_287.htmDescription
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
13499
53711
05869
82577
05869
1LQK8
AGILENT TECHNOLOGIES INC
DIV AGILENT BUSINESS CENTER
9780 S MERIDIAN BLVD
ENGLEWOOD
CO
80112
800-829-4444
28480
32345
DEFENSE REDUCTION AGENCY
MS 6201
8725 JOHN J KINGMAN RD
FORT BELVOIR
VA
22060
703-767-0832
18876
NSN (National Stock Number) 5310-00-264-1389, 5310002641389 NIIN (National Identification Number) 00-264-1389, 002641389
Part Numbers (Reference Numbers)
AN961-8T
AN961-8T
310-0751-030
401-6357235-35
4197412-001
4197412-001
4197
Required Categories
MATERIAL
MATERIAL DOCUMENT AND CLASSIFICATION
SURFACE TREATMENT
SURFACE TREAT
Required Description
COPPER ALLOY 270 OR
COPPER ALLOY 268 OVERALL
SAE1/2 HARD ASSN STD 1ST MATERIAL