National Item Identification Number
00-224-0738
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Description
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
05037
ANACOMP INC
15378 AVENUE OF SCIENCE
SAN DIEGO
CA
92128
703-753-2729
0HBH2
LEXEL IMAGING SYSTEMS INC
1500 BULL LEA ROAD SUITE 150
LEXINGTON
KY
40511
859-243-5588
05037
ANACOMP INC
15378 AVENUE OF SCIENCE
SAN DIEGO
CA
92128
703-753-2729
05037
ANACOMP INC
15378 AVENUE OF SCIENCE
SAN DIEGO
CA
92128
703-753-2729
25706
DABURN ELECTRONICS & CABLE CORP
224 PEGASUS AVE
NORTHVALE
NJ
07647
201-768-5400
Reference Numbers (Part Numbers)
101882-002
1018882-002
1018882-002
1018882D002
14-94
Required Categories
MATERIAL
MATERIAL DOCUMENT AND CLASSIFICATION
HOLE DIAMETER
PERIPHERAL SHAPE
Required Description
PLASTIC POLYAMIDE OVERALL
MIL-M-20693 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL