National Item Identification Number
01-486-1828
014861828
5306-01-486-1828
5306014861828
National Stock Number
Item Name
BOLT,SHEAR
Federal Supply Class
5306
Referenced on: http://clothingandindividualequipment.tpub.com//TM-10-7360-226-13-P/TM-10-7360-226-13-P0223.htm
Referenced on: http://clothingandindividualequipment.tpub.com//TM-10-7360-226-13-P/TM-10-7360-226-13-P0299.htmDescription
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See BOLT, MACHINE and BOLT, CLEVIS.
Commercial and Government Entity Code (Supplier Data)
80298
AAR MANUFACTURING INC.
DBA AAR MOBILITY SYSTEMS
201 HAYNES ST
CADILLAC
MI
49601
231-779-6305
Reference Numbers (Part Numbers)
50389-341
Required Categories
MATERIAL
GRIP LENGTH
GRIP DIAMETER
III END ITEM IDENTIFICATION
III PART NAME
Required Description
STEEL OVERALL
1.000 INCHES NOMINAL
0.188 INCHES NOMINAL
7360-01-473-3408
PIN