National Item Identification Number
01-372-6443
013726443
5306-01-372-6443
5306013726443
National Stock Number
Item Name
BOLT,CLOSE TOLERANCE
Federal Supply Class
5306
Description
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see BOLT, SHEAR. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see BOLT, MACHINE.
Commercial and Government Entity Code (Supplier Data)
4Y355
STEYR-DAIMLER PUCH AG
POSTFACH 1000
4400 STEYR
AUSTRIA
0FW39
STEWART & STEVENSON TACTICAL VEHICLE
SYSTEMS LP
5000 INTERSTATE 10 HWY
SEALY
TX
77474
713-867-1850
19207
Reference Numbers (Part Numbers)
N 05146 AM16X 1,5 X 60-100-A3D
12414622-268
12414622-268
Required Categories
NOMINAL THREAD DIAMETER
THREAD PITCH IN MILLIMETERS
FASTENER LENGTH
HEAD STYL
Required Description
16.0 MILLIMETERS
1.5
60.0 MILLIMETERS NOMINAL
C7 HEXAGON EXTENDED WASHER
RIB