National Item Identification Number
00-495-0188
004950188
3040-00-495-0188
3040004950188
National Stock Number
Item Name
SHAFT,SHOULDERED
Federal Supply Class
3040
Description
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Commercial and Government Entity Code (Supplier Data)
22888
Reference Numbers (Part Numbers)
2623040
2623040
Required Categories
MATERIAL
END SIMILARITY
LARGEST STEP DIAMETER
OVERALL LENGTH
STEP QUANTITY;
Required Description
STEEL CORROSION RESISTING
NOT IDENTICAL
0.998 INCHES NOMINAL
7.437 INCHES NOM