National Item Identification Number
00-383-9509
003839509
3040-00-383-9509
3040003839509
National Stock Number
Item Name
SHAFT,SHOULDERED
Federal Supply Class
3040
Referenced on: http://constructionforklifts.tpub.com//TM-10-3930-222-24P/css/TM-10-3930-222-24P_203.htm
Referenced on: http://constructionforklifts.tpub.com//TM-10-3930-222-24P/css/TM-10-3930-222-24P_214.htm
Referenced on: http://constructionforklifts.tpub.com//TM-10-3930-222-24P/css/TM-10-3930-222-24P_254.htmDescription
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Commercial and Government Entity Code (Supplier Data)
16662
LIFT PARTS MFG CO INC
DIV OF ECHLIN MFG CO THE
99 S BARRON BLVD
GRAYSLAKE
IL
60030
847-223-8989
77237
Reference Numbers (Part Numbers)
F600M2160
F600M2160
07-851217
851217
851217
Required Categories
MATERIAL
FIRST END STYLE
FIRST END DIAMETER
FIRST END SLOT DEPTH
FIRST END S
Required Description
STEEL
10 SLOTTED
1.0000 INCHES NOMINAL
0.219 INCHES NOMINAL
0.156 INCHES NOM