National Item Identification Number
00-364-3993
003643993
3040-00-364-3993
3040003643993
National Stock Number
Item Name
SHAFT,SHOULDERED
Federal Supply Class
3040
Description
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Commercial and Government Entity Code (Supplier Data)
30760
INGERSOLL RAND CO
200 CHESTNUT RIDGE RD
636
WESTWOOD
NJ
07675
201-573-0123
55380
HATCH & KIRK INC
5111 LEARY AVE NW
SEATTLE
WA
98107
206-789-9462
88032
CURTISS-WRIGHT ELECTRO-MECHANICAL
CORP
222 CAMERON DR
SUITE 200
PHILLIPSBURG
NJ
08865
908-387-6158
88032
CURTISS-WRIGHT ELECTRO-MECHANICAL
CORP
222 CAMERON DR
SUITE 200
PHILLIPSBURG
NJ
08865
908-387-6158
55380
HATCH & KIRK INC
5111 LEARY AVE NW
SEATTLE
WA
98107
206-789-9462
72915
GENERAL MOTORS CORP
ELECTRO-MOTIVE DIV
9301 W 55TH ST
430
LA GRANGE
IL
60525
708-387-6000
Reference Numbers (Part Numbers)
K-3233899
X250EAVA10X4
X250EAVA10X4
X250EAVA10X4
250EAVA10X4
3233899
32338
Required Categories
MATERIAL
FIRST END STYLE
FIRST END DIAMETER
FIRST END SPLINE LENGTH
FIRST EN
Required Description
NICKEL ALLOY
8 SPLINED
1.5550 INCHES NOMINAL
2.750 INCHES NOMINAL
1.5550 INC