National Item Identification Number
00-275-5798
002755798
3040-00-275-5798
3040002755798
National Stock Number
Item Name
SHAFT,SHOULDERED
Federal Supply Class
3040
Description
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Commercial and Government Entity Code (Supplier Data)
05606
GENERAL DYNAMICS ARMAMENT AND
TECHNICAL PRODUCTS INC.
128 LAKESIDE AVE
BURLINGTON
VT
05401
802-657-6109
Reference Numbers (Part Numbers)
117D2178
Required Categories
MATERIAL
FIRST END STYLE
FIRST END DIAMETER
FIRST END SPLINE LENGTH
FIRST EN
Required Description
STEEL COMP 4130
8 SPLINED
0.5273 INCHES NOMINAL
0.870 INCHES MINIMUM AND
0.9