National Item Identification Number
00-254-6112
002546112
3040-00-254-6112
3040002546112
National Stock Number
Item Name
SHAFT,SHOULDERED
Federal Supply Class
3040
Description
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Commercial and Government Entity Code (Supplier Data)
19207
Reference Numbers (Part Numbers)
10864098
Required Categories
MATERIAL
FIRST END STYLE
FIRST END TONGUE THICKNESS
END SIMILARITY
SECOND EN
Required Description
STEEL
7 TONGUE
0.363 INCHES MINIMUM AND
0.368 INCHES MAXIMUM
NOT IDENTICAL;