National Item Identification Number
12-346-0213
123460213
3040-12-346-0213
3040123460213
National Stock Number
Item Name
AXLE,SHOULDERED
Federal Supply Class
3040
Referenced on: http://generators.tpub.com//TM-9-6115-669-13P/css/TM-9-6115-669-13P_501.htm
Referenced on: http://generators.tpub.com//TM-9-6115-669-13P/css/TM-9-6115-669-13P_503.htm
Referenced on: http://generators.tpub.com//TM-9-6115-669-13P/css/TM-9-6115-669-13P_534.htmDescription
An axle having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers), periphersl flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or sholders may be machined to accommodate bearings couplings and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to transmit motion see SHAFT(1), SHOULDER. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1),STRAIGHT; and AXLE(1), STRAIGHT.
Commercial and Government Entity Code (Supplier Data)
C2311
BUNDESAMT FUER WEHRTECHNIK
UND BESCHAFFUNG
30 01 65
KOBLENZ
GERMANY
0261-400-0
D0857
LECHMOTOREN GMBH
ELEKTROMASCHINENBAU
SUEDLICHE ROEMERSTRASSE 12-16
ALTENSTADT
86972
GERMANY
08861-710-0
Image (It is your responsibility to verify the accuracy of these images)
Part Numbers (Reference Numbers)
040.09.0005
040.09.0005
Required Categories
Required Description