National Item Identification Number
01-461-3058
014613058
3040-01-461-3058
3040014613058
National Stock Number
Item Name
AXLE,SHOULDERED
Federal Supply Class
3040
Description
An axle having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers), periphersl flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or sholders may be machined to accommodate bearings couplings and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to transmit motion see SHAFT(1), SHOULDER. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1),STRAIGHT; and AXLE(1), STRAIGHT.
Commercial and Government Entity Code (Supplier Data)
11201
Reference Numbers (Part Numbers)
2559791-5
Required Categories
III END ITEM IDENTIFICATION
THE MANUFACTURERS DATA
MANUFACTURERS CODE
DESIGN
Required Description
SPECIAL TOOL AND SUPPORT EQUIPMENT
11201
2559791-5