National Item Identification Number
01-451-3741
014513741
3040-01-451-3741
3040014513741
National Stock Number
Item Name
SHAFT,SHOULDERED
Federal Supply Class
3040
Description
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Commercial and Government Entity Code (Supplier Data)
78286
65780
78286
Reference Numbers (Part Numbers)
65125-11214
65125-11214-102
65125-11214-102
Required Categories
MATERIAL
MATERIAL DOCUMENT AND CLASSIFICATION
SURFACE FINISH
FIRST END STYLE;
Required Description
STEEL COMP 4340
MIL-S-8844 MIL SPEC SINGLE MATERIAL RESPONSE
32.0 MICROINCHES;