National Item Identification Number
01-399-4192
013994192
3040-01-399-4192
3040013994192
National Stock Number
Item Name
SHAFT,SHOULDERED
Federal Supply Class
3040
Description
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Commercial and Government Entity Code (Supplier Data)
99167
Reference Numbers (Part Numbers)
742449
Required Categories
MATERIAL
FIRST END STYLE
FIRST END DIAMETER
FIRST END INTERNAL THREAD LENGTH;
Required Description
STEEL COMP 4340
9 INTERNAL THREADED
0.8742 INCHES NOMINAL
0.2710 INCHES MINIM