National Item Identification Number
00-168-3628
001683628
3040-00-168-3628
3040001683628
National Stock Number
Item Name
SHAFT,SHOULDERED
Federal Supply Class
3040
Description
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Commercial and Government Entity Code (Supplier Data)
80063
Reference Numbers (Part Numbers)
SM-B-618419
Required Categories
MATERIAL
SPECIAL FEATURES
III END ITEM IDENTIFICATION
III SUPPLEMENTARY FEATU
Required Description
STEEL CORROSION RESISTING
BRAZED JOINT TO WITHSTAND 15 LB IN. TORQUE
RADIO SET