National Item Identification Number
01-323-5265
013235265
3040-01-323-5265
3040013235265
National Stock Number
Item Name
SHAFT,SHOULDERED
Federal Supply Class
3040
Description
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Commercial and Government Entity Code (Supplier Data)
61744
THOMAS R MILLER CO INC
149 STONEWOOD DRIVE
BELLEVILLE
PA
17004
717-483-6390
88171
ELLISON BRONZE INC
125 W MAIN ST
FALCONER
NY
14733
716-665-6522
Reference Numbers (Part Numbers)
29-80
29-80
Required Categories
III END ITEM IDENTIFICATION
THE MANUFACTURERS DATA
MANUFACTURERS CODE
DESIGN
Required Description
STEEL DOOR
61744
29-80