National Item Identification Number
01-307-6341
013076341
3040-01-307-6341
3040013076341
National Stock Number
Item Name
SHAFT,SHOULDERED
Federal Supply Class
3040
Description
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Commercial and Government Entity Code (Supplier Data)
70876
BATH IRON WORKS CORPORATION
700 WASHINGTON ST
BATH
ME
04530
207-442-2827
70876
BATH IRON WORKS CORPORATION
700 WASHINGTON ST
BATH
ME
04530
207-442-2827
Reference Numbers (Part Numbers)
DE1052-2042-8-206
2492756 PIECE 206
Required Categories
SURFACE FINISH
FIRST END STYLE
FIRST END DIAMETER
END SIMILARITY
SECOND END
Required Description
32.0 MICROINCHES
1 PLAIN
0.9350 INCHES MINIMUM AND
0.9410 INCHES MAXIMUM
NOT