National Item Identification Number
01-291-5848
012915848
3040-01-291-5848
3040012915848
National Stock Number
Item Name
SHAFT,SHOULDERED
Federal Supply Class
3040
Description
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Commercial and Government Entity Code (Supplier Data)
62299
UNIVERSAL VISE AND TOOL CO
314 N JACKSON ST
1127
JACKSON
MI
49201
517-787-3791
Reference Numbers (Part Numbers)
QH-2 3B0183
Required Categories
MATERIAL
FIRST END STYLE
FIRST END DIAMETER
FIRST END WIDTH ACROSS FLATS
FIR
Required Description
STEEL
13 SQUARE
0.3500 INCHES NOMINAL
0.375 INCHES NOMINAL
0.375 INCHES NOMI