National Item Identification Number
01-290-0190
012900190
3040-01-290-0190
3040012900190
National Stock Number
Item Name
SHAFT,SHOULDERED
Federal Supply Class
3040
Description
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Commercial and Government Entity Code (Supplier Data)
83130
BUFFALO PUMPS INC
874 OLIVER ST
NORTH TONAWANDA
NY
14120
716-693-1850
83130
BUFFALO PUMPS INC
874 OLIVER ST
NORTH TONAWANDA
NY
14120
716-693-1850
54402
R P S INC
254 THIRD STREET
ELIZABETH
NJ
07206
908-629-4155
52081
RAM CENTRIFUGAL PRODUCTS INC
2746 VIA ORANGE WAY
SPRING VALLEY
CA
91978
619-670-9590
Reference Numbers (Part Numbers)
CA11451 PIECE 7
CA11453-7
11202
55-22276-15
Required Categories
MATERIAL
III END ITEM IDENTIFICATION
THE MANUFACTURERS DATA
MANUFACTURERS COD
Required Description
NICKEL ALLOY
CENTRIFUGAL PUMP
83130
CA11453-7