National Item Identification Number
01-284-6925
012846925
3040-01-284-6925
3040012846925
National Stock Number
Item Name
SHAFT,SHOULDERED
Federal Supply Class
3040
Description
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Commercial and Government Entity Code (Supplier Data)
31155
FLINT AND WALLING INC
WATER SYSTEMS DIV
95 N OAK ST
KENDALLVILLE
IN
46755
260-347-1600
Reference Numbers (Part Numbers)
129190
Required Categories
MATERIAL
FIRST END STYLE
FIRST END DIAMETER
FIRST END EXTERNAL THREAD LENGTH;
Required Description
COPPER ALLOY
12 EXTERNAL THREADED
0.4375 INCHES NOMINAL
0.6875 INCHES NOMINAL