National Item Identification Number
00-142-6282
001426282
3040-00-142-6282
3040001426282
National Stock Number
Item Name
SHAFT,SHOULDERED
Federal Supply Class
3040
Description
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Commercial and Government Entity Code (Supplier Data)
Reference Numbers (Part Numbers)
196371PC7
Required Categories
MATERIAL
LARGEST STEP DIAMETER
OVERALL LENGTH
STEP QUANTITY
III END ITEM IDE
Required Description
STEEL
1.188 INCHES NOMINAL
13.890 INCHES NOMINAL
6
5 IN TRAINING GEAR