National Item Identification Number
01-200-2243
012002243
3040-01-200-2243
3040012002243
National Stock Number
Item Name
SHAFT,SHOULDERED
Federal Supply Class
3040
Description
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Commercial and Government Entity Code (Supplier Data)
98955
MATHER EVANS AND DIEHL CO INC
509 LAFAYETTE
UTICA
NY
13502
98955
MATHER EVANS AND DIEHL CO INC
509 LAFAYETTE
UTICA
NY
13502
Reference Numbers (Part Numbers)
602027-08
602027-08-A
Required Categories
Required Description