National Item Identification Number
01-186-6481
011866481
3040-01-186-6481
3040011866481
National Stock Number
Item Name
SHAFT,SHOULDERED
Federal Supply Class
3040
Referenced on: http://www.tpub.com/content/misc_manuals_1/TM-3-4230-209-20-P/TM-3-4230-209-20-P0349.htm
Referenced on: http://www.tpub.com/content/misc_manuals_1/TM-3-4230-209-20-P/TM-3-4230-209-20-P0350.htm
Referenced on: http://www.tpub.com/content/misc_manuals_1/TM-3-4230-209-30-P/TM-3-4230-209-30-P0426.htm
Referenced on: http://www.tpub.com/content/misc_manuals_1/TM-3-4230-209-30-P/TM-3-4230-209-30-P0428.htmDescription
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Commercial and Government Entity Code (Supplier Data)
81361
Reference Numbers (Part Numbers)
C5-45-2992
Required Categories
MATERIAL
FIRST END STYLE
FIRST END TONGUE THICKNESS
FIRST END TONGUE WIDTH
F
Required Description
STEEL
19 TONGUE ROUNDED ENDS
0.186 INCHES NOMINAL
0.230 INCHES NOMINAL
0.313