National Item Identification Number
01-179-9240
011799240
3040-01-179-9240
3040011799240
National Stock Number
Item Name
SHAFT,SHOULDERED
Federal Supply Class
3040
Referenced on: http://www.tpub.com/content/carrierpersonnel/TM-9-2350-267-24P/css/TM-9-2350-267-24P_1111.htm
Referenced on: http://www.tpub.com/content/carrierpersonnel/TM-9-2350-267-24P/css/TM-9-2350-267-24P_885.htm
Referenced on: http://www.tpub.com/content/carrierpersonnel/TM-9-2350-267-24P/css/TM-9-2350-267-24P_990.htm
Referenced on: http://www.tpub.com/content/misc_manuals_3/TM-9-2350-287-24P/TM-9-2350-287-24P0802.htm
Referenced on: http://www.tpub.com/content/misc_manuals_3/TM-9-2350-287-24P/TM-9-2350-287-24P0899.htm
Referenced on: http://www.tpub.com/content/misc_manuals_3/TM-9-2350-287-24P/TM-9-2350-287-24P1015.htmDescription
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Commercial and Government Entity Code (Supplier Data)
06085
19207
NSN (National Stock Number) 3040-01-179-9240, 3040011799240 NIIN (National Identification Number) 01-179-9240, 011799240
Part Numbers (Reference Numbers)
BML65168
12332902
Required Categories
MATERIAL
FIRST END STYLE
FIRST END DIAMETER
FIRST END HOLE DIAMETER
FIRST EN
Required Description
STEEL
23 UNTHREADED CROSS DRILLED
0.7500 INCHES NOMINAL
0.1870 INCHES NOMINAL