National Item Identification Number
01-121-0629
011210629
3040-01-121-0629
3040011210629
National Stock Number
Item Name
SHAFT,SHOULDERED
Federal Supply Class
3040
Description
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Commercial and Government Entity Code (Supplier Data)
11083
Reference Numbers (Part Numbers)
6L2166
Required Categories
MATERIAL
FIRST END STYLE
FIRST END KEYWAY WIDTH
FIRST END EXTERNAL KEYWAY LEN
Required Description
STEEL
3 FLAT KEYWAY
0.2490 INCHES MINIMUM AND
0.2500 INCHES MAXIMUM
2.750 IN