National Item Identification Number
01-106-4048
011064048
3040-01-106-4048
3040011064048
National Stock Number
Item Name
SHAFT,SHOULDERED
Federal Supply Class
3040
Referenced on: http://constructiontractors.tpub.com//TM-9-2320-285-24P/css/TM-9-2320-285-24P_380.htm
Referenced on: http://constructiontractors.tpub.com//TM-9-2320-285-24P/css/TM-9-2320-285-24P_451.htm
Referenced on: http://constructiontractors.tpub.com//TM-9-2320-285-24P/css/TM-9-2320-285-24P_483.htmDescription
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Commercial and Government Entity Code (Supplier Data)
73342
NSN (National Stock Number) 3040-01-106-4048, 3040011064048 NIIN (National Identification Number) 01-106-4048, 011064048
Part Numbers (Reference Numbers)
6835558
Required Categories
MATERIAL
FIRST END STYLE
FIRST END DIAMETER
FIRST END SPLINE LENGTH
FIRST EN
Required Description
STEEL
18 SPLINED
2.0625 INCHES NOMINAL
1.078 INCHES NOMINAL
1.9375 INCHES NO