National Item Identification Number
01-100-0772
011000772
3040-01-100-0772
3040011000772
National Stock Number
Item Name
SHAFT,SHOULDERED
Federal Supply Class
3040
Description
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Commercial and Government Entity Code (Supplier Data)
34228
KOLLMORGEN CORPORATION
DBA KOLLMORGEN ELECTRO OPTICAL DIV
347 KING ST
NORTHAMPTON
MA
01060
413-586-2330
34228
KOLLMORGEN CORPORATION
DBA KOLLMORGEN ELECTRO OPTICAL DIV
347 KING ST
NORTHAMPTON
MA
01060
413-586-2330
Reference Numbers (Part Numbers)
055506
933B055506
Required Categories
MATERIAL
OVERALL LENGTH
THE MANUFACTURERS DATA
MANUFACTURERS CODE
DESIGN CON
Required Description
STEEL CORROSION RESISTING
2.281 INCHES NOMINAL
34228
055506