National Item Identification Number
00-091-6512
000916512
3040-00-091-6512
3040000916512
National Stock Number
Item Name
SHAFT,SHOULDERED
Federal Supply Class
3040
Description
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Commercial and Government Entity Code (Supplier Data)
00462
GOODRICH CORPORATION
DBA TRW LUCAS AEROSPACE
1550 VALLEY VISTA DR
DIAMOND BAR
CA
91765
909-569-0227
82402
Reference Numbers (Part Numbers)
42132-646
42132D646
Required Categories
MATERIAL
SURFACE FINISH
LARGEST STEP DIAMETER
OVERALL LENGTH
THE MANUFACTURE
Required Description
STEEL
32.0 MICROINCHES
1.875 INCHES NOMINAL
5.882 INCHES NOMINAL
00462
4213