National Item Identification Number
00-924-9139
009249139
3040-00-924-9139
3040009249139
National Stock Number
Item Name
SHAFT,SHOULDERED
Federal Supply Class
3040
Description
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Commercial and Government Entity Code (Supplier Data)
89954
Reference Numbers (Part Numbers)
701C884P1
Required Categories
MATERIAL
LARGEST STEP DIAMETER
OVERALL LENGTH
THE MANUFACTURERS DATA
MANUFAC
Required Description
STEEL
0.246 INCHES MINIMUM AND
0.248 INCHES MAXIMUM
3.780 INCHES MINIMUM AND;