National Item Identification Number
00-840-8527
008408527
3040-00-840-8527
3040008408527
National Stock Number
Item Name
SHAFT,SHOULDERED
Federal Supply Class
3040
Referenced on: http://constructionforklifts.tpub.com//TM-10-3930-242-24P/css/TM-10-3930-242-24P_565.htm
Referenced on: http://constructionforklifts.tpub.com//TM-10-3930-242-24P/css/TM-10-3930-242-24P_589.htm
Referenced on: http://constructionforklifts.tpub.com//TM-10-3930-242-24P/css/TM-10-3930-242-24P_764.htm
Referenced on: http://constructionforklifts.tpub.com//TM-10-3930-242-24P/css/TM-10-3930-242-24P_765.htm
Referenced on: http://constructionforklifts.tpub.com//TM-10-3930-634-20P/TM-10-3930-634-20P0097.htm
Referenced on: http://constructionforklifts.tpub.com//TM-10-3930-634-20P/TM-10-3930-634-20P0230.htm
Referenced on: http://constructionforklifts.tpub.com//TM-10-3930-634-34P/TM-10-3930-634-34P0105.htm
Referenced on: http://constructionforklifts.tpub.com//TM-10-3930-634-34P/TM-10-3930-634-34P0351.htmDescription
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Commercial and Government Entity Code (Supplier Data)
97403
CECOM LR CENTER
OPNS CENTER SITCO USASA MDW
10115 GRIDLEY RD SUITE 228
FORT BELVOIR
VA
22060
NSN (National Stock Number) 3040-00-840-8527, 3040008408527 NIIN (National Identification Number) 00-840-8527, 008408527
Part Numbers (Reference Numbers)
LT1-787
W69072
13212E5391-6
Required Categories
MATERIAL
FIRST END STYLE
FIRST END DIAMETER
FIRST END INTERNAL THREAD LENGTH;
Required Description
STEEL COMP 1020
9 INTERNAL THREADED
2.0000 INCHES NOMINAL
0.438 INCHES NOMINA