National Item Identification Number
00-793-3103
007933103
3040-00-793-3103
3040007933103
National Stock Number
Item Name
SHAFT,SHOULDERED
Federal Supply Class
3040
Description
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Commercial and Government Entity Code (Supplier Data)
03538
LOCKHEED MARTIN CORPORATION
DBA MS2 DIV MARITIME SYSTEMS &
497 ELECTRONICS PKWY 5 BLD
LIVERPOOL
NY
13088
315-456-2622
24446
Reference Numbers (Part Numbers)
7211917P1
7211917P1
Required Categories
MATERIAL
FIRST END STYLE
FIRST END GROOVE WIDTH
FIRST END GROOVE DIAMETER
FI
Required Description
STEEL CORROSION RESISTING
5 CIRCULAR GROOVED
0.0190 INCHES NOMINAL
0.0960 INC