National Item Identification Number
00-045-1827
000451827
3040-00-045-1827
3040000451827
National Stock Number
Item Name
SHAFT,SHOULDERED
Federal Supply Class
3040
Description
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Commercial and Government Entity Code (Supplier Data)
1PQF4
L-3 COMMUNICATIONS CORPORATION
DIV LINK SIMULATION & TRAINING
2200 ARLINGTON DOWNS ROAD
ARLINGTON
TX
76011
817-619-3754
Reference Numbers (Part Numbers)
297350
297350
Required Categories
MATERIAL
LARGEST STEP DIAMETER
OVERALL LENGTH
THE MANUFACTURERS DATA
MANUFAC
Required Description
STEEL
0.187 INCHES NOMINAL
1.203 INCHES NOMINAL
1PQF4
297350